製品情報

Change search condition

機能を選択
用途を選択
Select function
Select usage

CPI-410B

i-line / h-line Highly sensitive sulfonium salt type photoacid generator. Although it is a non-Sb type because it uses borate anion, it has the same acid strength as the SbF6 anion product and exhibits high cationically polymerizable properties. In addition, the cured product is excellent in low metal corrosiveness.

CAS RN® Non-disclosure
M.W. Approx. 1300

Physical characteristics / Packing / Development stage

Appearance Yellow powder
Packing 1kgBottle
Stage Mass
Sample Free:10g


Q&A

What is the absorption wavelength?
The i-line (365 nm) absorbs about 9600 [M-1 cm-1] in molar extinction coefficient, and the h-line (405 nm) absorbs about 1380 [M-1 cm-1].
There is almost no absorption in the g-line (436 nm).
What are the characteristics of the generated acid [HB (C6F5) 4]?
It has high acid strength and reactivity equivalent to HSbF6. In addition, since it is resistant to hydrolysis and does not contain hydrofluoric acid, it is possible to prevent corrosion of surrounding metal parts.
Are there types with different generated acids?
There is CPI-410B, which is a B (C6F5) 4 anion.
We have a track record of developing other anions, so if you have any anions that you are interested in, please feel free to contact us.
How much should I add?
Add about 0.5 to 2 wt% to the resin, depending on the application and film thickness.
What film thickness is suitable?
Although it depends on the application and the amount of addition, a thin film of 10 μm or less, which is less affected by the transmittance, is suitable.
In the case of a thick film of 100 μm or more, the type with a small molar extinction coefficient (CPI-100, 200 series, etc.) has high light transmittance in the depth direction and can generate acid to the deep part. The CPI-300 series is suitable for medium film thicknesses of about 50 μm.